We sell reconditioned / new meter pumps and cleanable or spin-on filters.
Meter Pump complete assembly. Approx. price $395 - $575. new $695.00
Suntec Meter Pump head Part # Suntec A2RA 7710 Price $118.
Cleanable Lenz or Combu Filters $69.95 or $49.95. add $10 for vac. gauge
Spin-on Filters $29.95 *These are top-quality spin on filters have a large stainless mesh filter surface area & replaces Lenz (Part #CP-752-100M.)
& Premium Waste Oil Filter part #4525 or reznor part #176535
*Note: Don"t use paper-type spin-on suction oil filters. They will clog up fast.
replace your J Pump Head part # J4NBN-A132B with new style Part # J4NB-A1000G. Price $229.00
Reconditioned J Pump Assembly Approx. price is $275 2-year warr
Tested Clean Burn J Pump / Parts
Clean Burn Model 500 / 525 Swing-Out black Burner. Approximate Price $1,495--$1,795. You must have a core burner to exchange.
Fill Pump & Filter Package
This is a slow flow pump, and will not stir up mud in the bottom of your tank. This is a heavy duty pump and cleanable filter; it will pump 20 gallons/hour and is designed for used oil. This Suntec waste oil pump and filter are also available separately.
Pump: $170. Cleanable Combu Filter: $50. gauge $15 combined price includes vacuum gauge $215.00 Can be shipped UPS. Call us for automatic fill pump setups. Click here for installed photo. This works great!!
Retention Heads / Flame Cones Approximate Price most $98-149.
Notice the difference between the different styles.
#1 the center is fairly straight through with a cone shape.
#2 the center is fairly straight through.
#3 the outside and the center are fairly straight through.
#4 the center is fairly flat, the outside is fairly straight through.
These bends make a huge difference in the flame, especially at low temperatures. Don't waste your time with old technology. Instead, call us, we can help you make your flame burn more efficiently with a tune-up.
Shenandoah Burners, Meter Pumps, J Pumps, and Parts
Complete, Reconditioned, Shenandoah B-5 Burner
This has been completely cleaned, serviced, inspected, and test-fired. (You must have core burner to exchange.) Comes with a 2-year warranty. Approximate price is $1495 - $1,795. & has passed a 30-point safety inspection.
Shenandoah Slide Out
Complete Reconditioned Slide Out. Approximate price is $595
(with exchange). This unit has been high pressure & chemical cleaned, temp. calibrated, pressure & amperage tested & comes with a complete 2-year parts warranty.
Adjustable RPM / Shenandoah Meter Pump/parts
Set it, and forget it. even with different fuel viscosities flame will not fluctuate its size! 2-year parts warranty. Approximate price with spin on filter not shown in pix is $575 - $675. exch.
Adjustable RPM / Universal Meter Pump
This Meter Pump is similar to the meter pump above, and will work on any furnace / boiler. With this one, you set it, and forget it. It is not necessary to adjust the flame, even with different fuel viscosities. The flame will not fluctuate its size! Comes with a 2-year warranty. Approximate price is $575 - $675.
Clean Burn Burners
110-volt Tjernlund Draft Inducers Approximate Price $100 - $175; and Barometric Dampers Approximate price is $40 - $80.
Complete recon. burners, oil pre-heater blocks are high pressure & chemical cleaned, temp.& amp tested
Fill Pump & Filter
Retention Head / Flame Cones
Air Pressure Regulators
Flame Controller / Oil Primary
Draft Inducers
Nozzles & electrodes
Most nozzles $39.95 Electrodes 39.50
New Targets $148-$175
spin-on oil filters $29.95
New suntec J Pump Head New Style / updated! Replaces Part # J3NBN-A132B Price & J4NB-a1000G --- $249.00
Suntec A2RA-7740 pump New. Price $129. This replaces A2RA-7736 and 7737 etc.
Retention Heads / Flame Cones Approximate price most $98.- $149
Notice the difference between the different styles.
#1 the center is fairly straight with a cone shape.
#2 the center is fairly straight.
#3 the outside and the center are fairly straight.
#4 the center is fairly flat, the outside is fairly straight.
These bends make a huge difference in the flame, especially at low temperatures. Don't waste your time with old technology. Instead, call us, because we can help you make your flame burn more efficiently with a tune-up.
We may have both 30 & 45 second shut off time available.
Approximate price is $119-169
Draft Inducers New 10'' only $295
110-volt Tjernlund Draft Inducers Approx Price $100 - $175; New 10'' only $295 Barometric Dampers Approximate price is $40-80.
Shenandoah Waste Oil Pump (A Style)
Complete reconditioned Shenandoah A style oil pump, includes pump, housing, and motor. Approximate price is $189.00 - $225
Fill pump price $125.add Lenz 69.95 Add $10 for a vacuum gauge
Fill Pump & Filter Package
This is a slow flow pump, and will not stir up mud in the bottom of your tank. This is a heavy duty pump and cleanable filter; it will pump 20 gallons/hour and is designed for used oil. This pump and filter are also available separately.
Can be shipped UPS. Call us for automatic fill pump setups. Click here for picture. This works great!!
Shenandoah J Pump Parts / Complete Assembly
See our new steady flow cruise control meter pump at the bottom of this page.
Reznor Burner exchange program 140-150-235-250-350 & venturion
Recon Reznor Burners, Meter Pumps, and Parts
This is a complete, reconditioned Reznor burner- new style preheater switches . The nozzle and preheater assemblies are cleaned and pressure & amperage tested. This unit was test-fired and has passed a 30-point safety inspection. (You must have a core burner to exchange.) Approximate price exchanged is $1,595 - $2,195.-- 150-250 & venturion $1695 -up
We sell reconditioned / new meter pumps and cleanable or spin-on filters:
We also have gearmotors for most Reznor heaters $189 exchange price
Meter Pump This is a complete assembly. Approx. price is $425 exchange or $695 no core
Cleanable Lenz or Combu Filters $69.95 or $49.95. add $13 for a vacuum gauge
Spin-on Filters $29.95 *These top-quality filters have a large stainless mesh filter surface area
replaces (Part #CP-752-100M.) , Reznor part # 176535, OR Premium waste oil filter part # 4525
Note: Do not use paper-type spin-on suction oil filters. They will clog up fast.
Suntec Meter Pump head Part #A2RA-7710 Price $109.
Reznor Meter Pumps
8'' Draft Inducers $100-175
140,000 or 235,000 BTU Reconditioned Firebox Exchange Program With our 8 new style round tubes, you will get more heat out of your heater, a 100° lower stack temperature, and longer intervals between cleanings. These tubes are not welded in, so that they are replaceable. Notice the burner flange reinforcement brackets. This keeps the burner flange mounting bracket straight. These come with a new target shield, and a 2-year warranty, and includes a clean-out door. You must turn in your old heat exchanger, clean out doors (not shown in picture), and fan limit switch assembly. Exchange price is $1,345 for 140,000 and $1,795 for 235,000. Compare this with a list price of more than $4,300! Call us at 330-674-0142. If you need all new fan-limit control switches, add $168.
Fill Pump & Filter
Recon Lanair HI/FI Burners, Pre-heater Assemblies, and Pumps
Lanair Hi/Fi Burner & Oil Pre-heater Assembly exchange program
This is a complete reconditioned burner for all H-I and F-I series Lanair furnaces (hinged or non-hinged). Exchange price $895. with 2 year parts warranty. Complete new exch. $1,295 above is a new Lanair H-I, F-I, and MX oil- preheater assembly. price is $559 exch.- recon price $295 exch. We ship UPS on credit card, daily.
Recon Energy Logic / Black Gold Burners, Meter Pumps, and Parts
Energy logic / Black Gold exchange Burners for EL 140h, 200, 340,350 & EL- boilers
get a complete, recon. exch. burner. price is aprox $1,295. 2-year parts warr. with recon oil pre-heater add 295 --or with new add $495 exch.
Energy Logic / Black Gold Oil Pre-heater Assembly and parts NEW!!
Complete new oil pre-heater Exchange price Models EL-140, 200 is $495 and EL-340 is $495
Boiler avail. We send UPS return shipping label for core return
used also available click on our E-logic parts page to right
New Steady volume Cruise Control Meter Pump
Recon Heat Exchanger / Fire Box Exchange Program for 140,000 or 235,000 BTU
Meter Pump Manual
This is the book for the Steady volume Cruise Control meter Pump. This has the complete information for operation and use of meter pumps. It also includes part numbers and illustrations. Price $25.
3. We do what we say we're going to do, within an agreed timeframe.
4. We have the parts in stock to get you up
and running.
Nozzles, Electrodes, Targets, & Tune-up Parts
Nozzles, Electrodes, Targets, & Tune-up Parts
This new Suntec meter pump will eliminate flame fluctuations, due to varying viscosities of fuel. If you have the old style pressure adjustment for your flame size, your best option is to update to a meter pump. This is a volume-control pump, and does not use a pressure regulator at all. This pump is RPM-specific, for each different size heater, making the correct volume at the pump, hence the right size flame in your heater. You must call us at 330-674-0142 to get the correct pump and RPM-specific motor for your heater. People love these pumps, because they work super, and no flame adjustment is ever necessary. Even when using thick, thin, hot, or cold fuel, the flame size will not fluctuate. These pumps will also build up pressure (up to 50 PSI) behind a clogged nozzle, blowing the build up right through. Your heater will slightly cough, spit, sputter, and keep right on trucking, even at 2 AM. new Price is $525.
Fixed RPM Meter Pump
Shows Wall Mount.
Shows Grounding Screw.
Shows tank & wall bracket.
now even better, updated with an e-z diagnosis 1/4 turn valve, e-z mounting brackets & spin on filter
New Suntec Updated J Pump Head replaces part # J4NB-A1000G
& old style Part # J3NBN-A132B. Price $249.00
Compete recon. J Pump Assembly includes pump, motor, and bracket. Approximate price is $295. 2-year warranty.
Cleanable Combu filter $49.95 Lenz 69.95 Add $10 for a vacuum gauge.
Tested Shenandoah J Pump Parts / Complete Assembly
Incorrect Picture diagram for pump--way too many fittings
Do it right & simple.
Have you ever noticed how many fittings some people need to get something done? Why do they make it so complicated?? 30 places to leak!! Don't try this. It will suck air and spit and sputter.
It can be done so simple, with just a few fittings. Mount your pump near the tank. Make it a direct shot, on the suction line.
New Meter Pump gearmotors for Reznor $189 exch.
Reznor retention heads
UPS shipment available for all parts!
See our new steady volume cruise control meter pump at the bottom of this page
Heat Exchanger/Fire Box for 350,000 exch. or 500,000 BTU Reznor no core $1500
Recon Heat Exchanger / Fire Box for 150,000 & 250,000 BTU Reznor
Reconditioned Firebox for 150,000 & 250,000 BTU reznor includes a clean -out door. no core charge . only $1,495 no core . Compare this with prices of more than $5,200! Call us at 330-674-0142. We can ship this chamber to your door by truck-line on credit card --- 1 new available only $2200 no core
Complete recon 350,000 only $2,195 exchange compare to dealer prices over $6,900!
our most popular heat exchanger unit
Nice clean out tool available
only $20.
Supreme 5 Retention head / Flame Cones Click on pix for details Click on pdf for instructions
left pix frt view
rt pix side view
rt pix bottom view .
watch our "steady volume cruise control meterpump video"
click on red center button to play the video it tells about use , function operation and installation
dont miss this important update on your heater
new style Reznor venturion
Recon Lanair MX Burner & Oil Pre-heater Assembly exchange program
This is a complete reconditioned burner for all MX series Lanair furnaces Exchange price $895. with 2 year parts warranty. complete new exch. $1,295 Also pictured above these is a new Lanair
MX- HI oil- preheater assembly. price $559 exch.- recon price $295 exch. We ship UPS on credit card, daily.
see our new steady volume cruise control meter pump at the bottom of this page
This is a slow flow pump, and will not stir up mud in the bottom of your tank. This is a heavy duty pump and cleanable filter; it will pump 20 gallons/hour and is designed for used oil. This pump and filter are also available separately.