self bleeding pressure side filter for Lanair
Recon Lanair Waste Oil Heaters,  Exchange Burners, Preheaters, Parts
Lanair H-I 260,000 and 185,000 BTU heater.  This heater was disassembled and reconditioned from the bottom up.  This furnace has passed a rigorous 50-point functional & safety inspection.  Normal price is approximately $4,495 for 260,000 BTU and $4,395 for 185,000 BTU. This price includes easy clean out panel & a brand new, steady-volume cruise control meter pump, so that you never need to adjust the flame again.  It also includes a secondary spin-on filter to keep the inside of the oil pre-heater assembly clean.  Comes with a complete 2-year parts warranty. 
Reconditioned  50-point  safety inspection.  $3,995 for a 320,000 & 140,000 BTU  includes new, steady volume cruise control meter pump,& a secondary spin-on filter to keep oil pre-heater  clean. 2-year parts warranty
Eliminate clogged nozzles.
Drop-in assembly.  People don't believe...
it is so easy.
New  Burner or Oil Pre-heater Assembly Exchange Program.  Do you have problems with plugged nozzles?  See our Technical Help Page for help. Call us to order a new oil pre-heater  or burner.
Swing burner open for easy service.
No gaskets to tangle.
Upper view
Installed view of clean out panel on Model 180 and 260.  Model 140 is very similar, but uses two panels.
In stock; fast shipping!
3000 rpm - super price - exact fit
We have lots of Tune- up parts
 available; 
see our 
parts page.
Meter pump parts
Tremendous value
NOTE:  Our website is for your information only, and is an overview of what we have reconditioned / sold in the past.  
Call us for exact information and to see what we currently have on hand.
Millersburg, OH 44654

P:330-674-0142

Why Choose Us? 
1. We make satisfied customers a priority.
2. We have the best value.
3. We do what we say we're going to do, within an agreed timeframe.
4. We have the parts in stock to get you up 
and running.
Lanair MX300 BTU Waste Oil Heater  This heater was disassembled and reconditioned from the bottom up.  This furnace has passed a rigorous 50-point functional & safety inspection.  
Normal price is approximately $5,395 for MX300 or MX 250. This style of heat exchanger is easy to clean. This price includes a brand new, steady-volume cruise control meter pump, so that you never need to adjust the flame again.  It also includes a secondary spin-on filter to keep the inside of the oil pre-heater assembly clean.  This entire waste oil heater system comes with a complete 2-year parts warranty. we have one duct-able unit in stock
Lanair H-I 320,000 BTU & 140,000 BTU
Lanair H-I 260,000 and 185,000 BTU
Lanair H-I & F-I Burner & Oil Pre-heater Assembly
Easy Clean-out Panel (installed)
Meter Pump kit  & Secondary Filter
Click on any picture to view a larger image.
Lanair MX300 & MX250
Rear enclosed fan blows heat through unit.
Burner Door Closed
Easy Clean Out
with swing-out burner
A powerful heater  8" top exhaust
A nice size heater.
Lanair MX200 & MX150
cleans easy
easy swing burner
top or side 6" exhaust
Popular size
Lanair MX200 & MX150 BTU Waste Oil Heater  This heater was disassembled and reconditioned from the bottom up.  This furnace has passed a rigorous 50-point functional & safety inspection.  Normal price is approximately $4,495 for MX200 or MX150 (for ductable [MXD] models] add $200).  This style of heat exchanger is easy to clean. This price includes a brand new, steady-volume cruise control meter pump, so that you never need to adjust the flame again.  It also includes a secondary spin-on filter to keep the inside of the oil pre-heater assembly clean. This entire waste oil heater system comes with a complete 2-year parts warranty. 
6'' exhaust outlet
Recon MX-XT series Burner & Oil Pre-heater Assembly Exchange Program
Very simple Lanair burner wiring.
Left side view
Right side view.
Rear view.
Electrode adjustment picture.
Front view.
Drop-in assembly.  People don't believe it is so easy.
Eliminate repeated clogged nozzles.
MX -XT Burner or Oil Pre-heater Assembly Exchange Program.  Do you have problems with plugged nozzles?
See our Technical Help Page for help. Or call us to order an Oil Pre-heater Assembly new price is $559.exch.
recon. price is $295 exch. New burner exchange price is $1,395; our reconditioned complete burner exchange is $895 and comes with a 2-year parts warranty. and burns synthetic oils.
Swing burner closed.
  Lanair H-I 260,000 and 185,000 BTU 
We ship UPS daily.
its so easy @ central ohio heaters
multi Truck Line Shipping options available
 trades welcome.
Watch our tutorial video for Lanair model  M-X  250 about 23 minutes it covers installation & maintenance etc.
This video is to help our customers understand how a Lanair heater works and has some installation help.    about 23 min
All brands, product names, or trademarks are property of their prospective owners/holders.
.                           All btu ratings on this site are based on factory specifications
Our new  meter pump assembly, eliminates flame fluctuations &  has an ez diagnosis 1/4 turn valve & also includes secondary spin on filter to keep oil pre-heater clean  works wonderful on lanair heaters . click on pix also   see our meter pump video on bottom of our parts page .
swing-out burner  & 8'' exh outlet
8'' exhaust outlet 110 volts
eliminate your troubles with a reconditioned Lanair H-I or MX/XT series Burner
or pre-heater today
 New  burner motor for H-I / F-I only $119 exchange price
new heavy duty electronic transformers for Lanair
17000 volt electronic transformer for all Lanair burners $129 1 yr warranty
terms of use: our website info is free but use only at your own risk : by using you accept all responsibility for problems / dangers
H-i / F-I Burner or Oil Pre-heater Assembly Exchange Program.  Do you have problems with plugged nozzles? See our Technical Help Page for help. Or call us to order an Oil Pre-heater Assembly new price is $559 exch. - recon price is $295 exch. H-I / FI burner exchange price is $1,295; our reconditioned complete burner exchange is $895  and comes with a 2-year parts warranty.  and burns synthetic oils 
self bleeding pressure side filter for Lanair
this is our new and improved self bleeding pressure side filter 
perfect for lanair
only $98
All btu ratings on this site are based on factory specifications​
Lanair HI 320,000   &  HI 140,000
click on these tank images for better pix 
Lanair H-I 185-320,000 btu----------or mx150-300,000 btu withULtank option add $1695
NEW WEBSITE COMING soon sorry for the AAA's